MAINABOUT HASCONPRODUCTHASCON NEWSCONTACT HASCON  
   
 

HASCON MOTOR NEWS:

  METALEX 2010 at Bitec Bangna Booth E221, on 10:00-19:00
 
 
     
 
 PRODUCT CATEGORY
Standard Motor
Single Phase Motor
Three Phase Motor
Brake Motor
   
 
     
 
 Performance Data
2 Pole-3000 rpm
4 Pole-1500 rpm
6 Pole-1000 rpm
8 Pole-750 rpm
 
     

Current page : Main | Product | Standard Motors

 
 STANDARD MOTORS


 
HC
Standard Motors
  Standard Electric Motor (HC series)
  HC series are suitable for driving various kinds of machines of equipment, The output ratings are from 0.18 kW to 355 kW. The frame sizes are from 80 to 355

HC series have cast iron stator frames, endshields and terminal boxes. The feet integrally cast into the stator frames, The terminal box is mounted on the top as standard.

All motors comply with the requirements for European CE marking.
All motors are designed for high efficiency and low temperature rise giving a long economical service life.
 - Motors with terminal boxes on the right side or on the left side are available.

 
  Insulation and temperature rise
The insulation system is Class F (105K) and the motors in sizes 80-355 are designed to operate with Class B (80K).

Cooling and ventilation
The standard cooling method is Totally Enclosed Fan Cooled (TEFC) in accordance with code IC411 of IEC 600034-6 Standard motors in sizes 80-315 are equipped with radial-flow plastic fans.
Standard motors in size 355 equipped with radial-flow aluminium fans.

Enclosure
The standard degrees of protections is IP55.
The IP55 enclosure means complete liquidproof and dustproof protection.
A higher degrees of protection is available.

Voltage and frequency
Standard voltages are 380V 50Hz, 400V 50Hz or 415V 50Hz, but can be wound for any single voltage in the range 200-660V at a frequency 50 or 60Hz.
The motos will operate statisfactorilly with volage variations of +/- 5% from the rated voltage.

Noise
The permitted noise levels of electical machines are fixed in IEC60034-9 (EN60034-9). The noise level of HC motors is well below this limit values.
For detail, please refer to the performance data tables.

Vibration
Standard motors are designed to vibration class N (normal), vibration class R (reduced) and vibration class S (Special) are available on request.
 
   
 
   
 
 

Main  |  About  |  Hascon Product  |  News  |  Jobs  |  Contact

 
 

Copyright 2007 TN GROUP. All Right Reserved.